PIC18F14K50 Tag

Hi there! In this tutorial we keep talking about the HC-SR04 sensor based distance meter. In the previous tutorial we created it without the MCC module, and this time I’ll show ...

Hi again! In this tutorial we will make the last device in this series that uses the 7-segment LED indicator. This time, we will create the ultrasonic distance meter based on the ...

Hello! Today we will keep talking about the DS18B20 sensor and 7-segment LED indicator based digital thermometer but this time we will use the MCC for configuring the required MCU ...

Hello! This time we will make a digital thermometer based on the DS18B20 sensor and the 7-segment indicator which we considered in tutorial 6 and tutorial 7. Actually, I already ...

Hi there! We continue operating with the WS2812B LEDs but this time we will use the MCC. Actually, the program will be very similar to the previous one, the only new thing we will ...

Hi there! Today we will try to do something that is nearly impossible - control the WS2812B LEDs using a PIC18F14K50 MCU. Why is it impossible? Because these LEDs require very ...

Hello again! In this tutorial we continue talking about the non-blocking operations with LEDs and buttons. Previously I showed you how to make them without the MCC, and this time ...

Hello again! This time we will put aside the 7-segment indicator and will return to buttons and LEDs but now we will double their number. Today, I’ll tell you how to perform ...

Hello again! In this tutorial I will keep talking about the connection of the 7-segment LED indicator. If you didn’t read the previous tutorial, you can skip it because I’ll ...

Hello again! Despite the hard times, I’m still here, and keep working on tutorials. Because whatever happens, “the show must go on!” So this time we will not consider any new ...

Hi again! In this tutorial I will show you how to implement the same task as in the previous one (to toggle the LED state every time when the button is pressed) but using the ...

Hi there! In the previous tutorial, we figured out how to use the MPLAB Code Configurator to create a simple Blink program. This time we’ll move forward and add another part to ...

Hi again! In this tutorial, I want to show you how to implement the same task as in the previous one (blinking the LED) but using the MPLAB Code Configurator (MCC). So if you ...

Hello again! In the previous tutorial I told you about the PIC18F14K50 MCU and the required hardware and software tools to work with it. Today, we’ll assemble a simple circuit and ...

Hi there! It’s been a long time since we’ve finished the Microcontroller Basics tutorials which were devoted to programming the PIC10F200 MCU using the Assembly language. This ...