• Electromagnetics I
  • Ch 10: Appendices
  • Loc 10.2
  • Electromagnetics I
  • Ch 10
  • Loc 10.2

Permeability of Some Common Materials

The values below are relative permeability

for a few materials that are commonly encountered in electrical engineering applications, and for which

is significantly different from 1. These materials are predominantly ferromagnetic metals and (in the case of ferrites) materials containing significant ferromagnetic metal content. Nearly all other materials exhibit

that is not significantly different from that of free space.

The values presented here are gathered from a variety of references, including those indicated in “Additional References” at the end of this section. Be aware that permeability may vary significantly with frequency; values given here are applicable to the frequency ranges for applications in which these materials are typically used. Also be aware that materials exhibiting high permeability are also typically non-linear; that is, permeability depends on the magnitude of the magnetic field. Again, values reported here are those applicable to applications in which these materials are typically used.

  • Free Space (vacuum): .
  • Iron (also referred to by the chemical notation “Fe”) appears as a principal ingredient in many materials and alloys employed in electrical structures and devices. Iron exhibits that is very high, but which decreases with decreasing purity. 99.95% pure iron exhibits . This decreases to at 99.8% purity and is typically below 100 for purity less than 99%.
  • Steel is an iron alloy that comes in many forms, with a correspondingly broad range of permeabilites. Electrical steel, commonly used in electrical machinery and transformers when high permeability is desired, exhibits r. Stainless steel, encompassing a broad range of alloys used in mechanical applications, exhibits in the range 750–1800. Carbon steel, including a broad class of alloys commonly used in structural applications, exhibits on the order of 100.
  • Ferrites include a broad range of ceramic materials that are combined with iron and various combinations of other metals and are used as magnets and magnetic devices in various electrical systems. Common ferrites exhibit in the range 16–640.

Additional Reading:

 

Ellingson, Steven W. (2018) Electromagnetics, Vol. 1. Blacksburg, VA: VT Publishing. https://doi.org/10.21061/electromagnetics-vol-1 CC BY-SA 4.0

 
Use left and right arrow keys to change pagesUse left and right arrow keys to change pages.
Swipe left and right to change pages.\Swipe left and right to change pages.
Make Bread with our CircuitBread Toaster!

Get the latest tools and tutorials, fresh from the toaster.

What are you looking for?