Microcontroller Tag

Hello again! Despite the hard times, I’m still here, and keep working on tutorials. Because whatever happens, “the show must go on!” So this time we will not consider any new ...

Hi again! In this tutorial I will show you how to implement the same task as in the previous one (to toggle the LED state every time when the button is pressed) but using the ...

Hi there! In the previous tutorial, we figured out how to use the MPLAB Code Configurator to create a simple Blink program. This time we’ll move forward and add another part to ...

Hi again! In this tutorial, I want to show you how to implement the same task as in the previous one (blinking the LED) but using the MPLAB Code Configurator (MCC). So if you ...

Hi again! In the previous tutorial we installed the e2 studio IDE with the FSP to work with the RA MCUs. Now I’ll tell you in more detail about what exactly FSP is and how it ...

Hello again! In the previous tutorial I told you about the PIC18F14K50 MCU and the required hardware and software tools to work with it. Today, we’ll assemble a simple circuit and ...

Hi there! It’s been a long time since we’ve finished the Microcontroller Basics tutorials which were devoted to programming the PIC10F200 MCU using the Assembly language. This ...

Hi again! In the previous tutorial I told you about the RA family of Renesas. Now the time has come to do some practical work. We’ll start with the installation of the e2 studio ...

Hello there! After a long break I’m here again. And I want to introduce you to the new series of tutorials, which this time will be devoted to the RA family of Renesas Electronics ...

We’ve already discussed the hardware and software of the dot matrix LED display digital clock. Finally, we’re in the last part and this time we are going to check the PCBs, the ...

In the first part of this project/tutorial, we discussed the hardware of the dot matrix LED display digital clock. We discussed the function of each component and how they are all ...

In this project/tutorial, we are going to discuss how we can build a simple yet very helpful device in managing our lives, a digital clock. While there are digital clocks nowadays ...

So we are almost done with this project/tutorial. In the previous part, we’ve discussed the software or code of the non-contact forehead IR thermometer. This time, we are going to ...

In the second part of this project/tutorial, we discussed the hardware part of the non-contact forehead IR thermometer. We discussed its operation and the function of its main ...

In the previous part of this project/tutorial, we have shown the components needed to build this non-contact forehead IR thermometer. In this part, we are going to discuss the ...